EH-1 Enclosed Trailer Tool Storage System use and installation instructions. IMPORTANT MUST READ !!!

Thank you for purchasing a TrimmerTrap product. With proper care it will provided years of protection for your equipment. The EH-1's individual, modular parts allow you the flexibility to customize tool storage in your enclosed truck, trailer or even the shop. Considerable thought should be given as to how and where to install the different parts. The floor mounted handle holder should be attached with the 5/16" bolts and lock nuts provided. Be certain to check the underside of the floor for any wiring or other parts that could interfere with the chosen location. Because the end handle holder receptacles are angled, any tools installed into them will spread out at the top, therefore, when choosing a mounting location be sure the door(s) will close with a tool installed into the end receptacle. IMPORTANT: When installing the EH-1 into a truck with an overhead door you must be sure there is sufficient clearance for the door when in the open and closed positions. All of the clips, including the grease gun holder should be attached to the liner inside the body (minimum thickness ¾" ) using two of the sheet metal screws provided. The five spring action clips included have a gripping range of 7/8" to 1&1/2". The eight black vinyl coated clips included have a gripping range of 1&1/2" to 1&7/8". Be sure to install a tool into each handle holder receptacle to use as a reference for proper alignment when attaching its respective clip above the holder.

Hardware bag parts contents:
-Eight vinyl coated spring steel clips
-Five spring action clips
-One grease gun holder for standard 2&1/4" guns
-Two 5/16" by 2" hex bolts
-Two nylon lock nuts
-Quantity of 5/8" sheet metal screws

Return to EH-1 page

Home | All Products | Open Trailer | Enclosed Trailer | Sulkies | Blade Blocker
| Videos | Links | Instructions | Warranties | TT's Tips | E-mail Us