DB-1 Dual Back Pack Blower Rack

This is the blower rack to have when space and strength are important. The easy to use automatic positive latching mechanism is "Fast and Foolproof". Simply pull up on the latch mechansim and push back rotating arm to load or unload blowers. Constructed using 1 1/2" steel tubing and heavy duty components, the DB-1 is rugged enough to stand up to years of heavy commercial use.

•Locks with a standard long shackle padlock.
•Uses less trailer space than side by side single blower racks.
•Durable powder coat finish.
•Mounts to the upper rail and the trailers vertical post for stability.
•Some model blowers require the installation of a special adapter kit.

Our RC-3 Rubber Clamp is perfect for securing blower tubes.

The AK-4 is required for the following blowers for the first generation BR-1 and DB-1:

-Kawasaki KRB 650B, KRB 750A and KRB 750B

-Red Max 4800, 5000, and 8000 (depending on 8000 frame style, call TrimmerTrap at 1-800-279-8727 to verify proper application)

-Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751

-Husqvarna 356

-Shindaiwa EB802

The AK-4 is required for the following blowers for the second and third generation BR-1 and DB-1:

-Kawasaki KRB 650B, KRB 750A and KRB 750B

-Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751

-Husqvarna 356

-Shindaiwa EB802

-All Stihl blowers require either the ST-1 (Stihl 300 or 400 series) or ST-2 (Stihl 500 or 600 series) Blower Rack.
-THIS RACK IS NOT RECOMENDED FOR BR 500 & 600 SERIES BLOWERS

Click Here to see the >DB-1 instruction sheets and Adapter Kit intruction sheets
Click Here to see blowers being secured in a DB-1 (File Size - 1.9MB)

Adjustable Backrest Bracket and Blower Rest Bracket

Pull Lacth to Release Blowers

To secure blowers simply move the rotating arm to close position. Latch will automatically engage.

Locks with a padlock.