ST-4 STIHL Blower Rack
(Late Style 600 & 700 Series)

Stihl Blower RacksPatent # 7849557

The ST-4 is the only rack designed specifically for the newer style STIHL BR 600 & 700 Series blowers with a black leaf grate on the bottom. Simply set your blower on the lower posts and pivot the top toward the rack, allowing the "sliding lip" to, slide under the handle. Complete installation by pulling the ball knob on the rack and lowering the "sliding lip" over the blower. The blower is secured at the top and bottom and will not move around.

• Extremely fast "in and out time."
• Locks with a standard padlock.
• Heavy gauge welded steel construction is plated for corrosion resistence.
• Mounts to open or enclosed trailers.
• Our RC-4 Rubber Clamp is perfect for securing the STIHL 600/700 series blower tubes.
 

NOTE: Holds the newer style BR-600 and Br-700 with leaf grate on the bottom.

Instructions

 

Stihl Blower Racks      

The ST-4 can be installed on an enclosed trailer (shown below) by simply adding a spacer behind the upright bar in order to provide the proper offset from the wall to allow the slide mechanism to function properly.

 

Stihl Blower Racks

ST-2 Stihl Blower Rack
ST-2 Stihl Blower Rack
Stihl Blower Rack Spacer

 


Call us at (800) 279-8727 

Trimmertrap - Made in the USA

 



Copyright 2014 - Trimmer Trap