| Navigate |
| • Home |
| • All Products |
| • Open Trailer |
| • Enclosed Trailer |
| • Sulkies |
| • Blade Blocker |
| • Videos |
| • Links |
| • Instructions |
| • Warranties |
| • TT's Tips |
| • E-Mail Us |
SM-1 Bronco Rider Sulky
Patent No. 6497422, 6488291
Let's face it. Sulkies have a hard life.
Think about your current sulky's. Are they worn out? Why? Chances are it's because of the almost constant contact with the ground. The daily wearing and tearing, banging and bending slowly destroys them. The unique design of the Bronco Rider places the "main frame" of the sulky over 4 inches above the ground, away from all of this wear and tear. Only the actual foot platform rides near the ground. So if it does become worn or damaged you can quickly and inexpensively replace only the foot platform.
|
|
|
|
|
|
|
|
SAFE. Bulit in "yaw limiter" allows the foot platform to ivot up to 65°
enabling "zero°" turns, yet prevents dangerous jacknifing.
SUPER STRONG AXLES. 7/8" axles pass through the box tube frame and are lovated close to the junction
of the two frame members for strenght and rigidity. Axle support housings further strengthen axles and insure correct
alignment even after extended use
NO FLEX FRAME. The "main frame" is an 11 guage square tube, all-welded, reinforced steel
structure with tremendous strength and rigidity built to withstand the day to day rigors of production mowing.
Bronco Rider will provide season after season of dependable service with only routine
maintenance.
REPLACEABLE FOOT PLATFORM. Because of the unique design, if the foot platform becomes worn
or damaged it can be replaced as a single, inexpensive part instead of replacing the entire unit. This design makes
Bronco Rider superior to other sulkies which are constructed using a single piece of
sheet metal. The large size and raised traction dimples assure a safe and comfortable place for the operator.
SMOOTH RIDE . Large diameter 4-ply rated "Go Cart Tires" have almost 3 times the amount of rubber
as some tires. These "Super Tough", extra H.D. tires practically end flats and other tire problems. Offset wheel hubs give
you a choice of track widths by reversing the wheels.
QUICK DISCONNECT. Disconnecting the foot platform from the connecting arm is
accomplished by the removal of a single lynch pin, and the heavy duty mounting bracket bolts quickly
and easily to mower (inset, top left).
Important notice to all sulky users/purchasers
Many factors effect the operations of a sulky. Terrain conditions such as slope, ground type, ground moisture, etc. are all
factors. Tehr mower being used to pull the sulky is obviously a major factor. Generally, the larger the mower, the less effect
the sulky will have on the mower's operation. Operator weight and operating style also have an effect. Proper mower setup such
as tire pressure, deck pitch/weight balance and drive adjustments become very critical. We recommend a minimum mower size of 48"
(preferably with hydro drive) for the Bull Rider sulky. Although operation is satisfactory on
smaller mowers the factores above should be carefully considered. The Bronco Rider sulky can be used
behind most 36" and larger mowers with excellent results. It is the user's responsibility to make vertain the sulky suits the mower
on which it is installed. A mounting bracket which attaches to the lawn mower's motor frame connects the sulky to the mower. Most
mowers currently on the market are sufficiently strong in this area; however some mowers, such as the Ferris dual drive require an
optional reinforcement plate to further strengthen this area. It is the user's responsibility to make certain that the optional
reinforcement plate is installed on any mower where strength of the motor frame is in question. TrimmerTrap part no. SP-43.
Home
| All Products
| Open Trailer
| Enclosed Trailer
| Sulkies
| Blade Blocker
| Videos
| Links
| Instructions
| Warranties
| TT's Tips
| E-mail Us
| P.O. Box 34421 • Louisville, Kentucky 40232 | Phone : |502| 637.7008 or 800.279.8727 |