Blade Blocker Pictures

The pictures below are illustrations ONLY. Discharge chutes will need to be notched for proper operation.

If you're not sure where to purchase our products, give us a call at (833) 853-6472 and we'll make sure you get your products quickly and easily. If you have a question or special request, just click here and fill out our short form detailing your question. We'll get back to you promptly.

 

Blade Blocker Walk-Behind Installed on a Skag V-Ride

 

 

 

Ferris Model SRS-Z2

 

 

Ferris ProCut Three-Wheeler
Photos courtesy of Kenneth D. Musser

BLACK L-BRACKETS ARE NOT FACTORY PIECES. THEY WERE FABRICATED BY INSTALLER

 

 

Blade Blocker Walk Behind Installed on a Scag 52" Walk Behind Mower

 

Blade Blocker Rider Installed on a Snapper Pro 48" ICD deck

 

Blade Blocker Rider Installed on a John Deere 648R Stand-On

 

Blade Blocker Rider Installed on a Scag V-Ride

Blade Blocker Walk Behind Installed on a Toro GrandStand

The pictures below are illustrations ONLY. Discharge chutes will need to be notched for proper operation.

 Blade Blocker installed on aeXmark Metro 48"

Blade Blocker installed on a Ferris 36" belt drive

Blade Blocker installed on a Scagg 52" Hydro

Pictured above: the baffle has been notched in order to position the actuator arm forward

Blade Blocker Rider installed on a Scag Tiger 61"

The pictures below are illustrations ONLY. It shows how to position the Blade Blocker post mount on smaller Scag Tiger Cubs. The discharge chute will still need to be notched for proper operation.

Blade Blocker installed on a Ferris 61" Rider

Pictured above: the baffle can be heated then formed and will hold the shape when it cools

WB-1 installed on a Ferris 52"

BB-1-WB installed on a Snapper

BB-1-WB installed on a Ferris

BB-1-WB installed on a Toro

BB-1 Rider installed on a John Deere

BB-1 Rider installed on a Ferris

BB-1 Rider installed on a Simplicity

Photo of a Ferris Zero Turn with a Blade Blocker Rider installed. Note the spacers between the bottom of deck and hinge. The spacers lower the hinge slightly, so that the hinge does not interfere with the discharge chute bracket when the chute is lowered.

 

 

Call us at (833) 853-6472 

Click here for our Question / Special Request form!